Wet Pan Mill Grids
Machine Type: We can supply for most types of wet pan mill. our customers range from OEMs' to the smallest, but no less important privately owned brick manufacturer:
Materials Specification: Our grids can be manufuctured in a range of materials from mild steel upto our most popular grid plate material has a through hardness of approx 445 Hv and provides the best cost / lifetime perforamce of any material currently available
Materials thickness available: Upto 35mm plate
Perforation Type: Please see attached pdf, which gives details of the various patterns we can manufacture. Slots and holes are available
Grid Perforation
Slots or Holes: Perforated as required, please specify your requiremnts.
All perforations are made with a 5 degree tapered opening to allow maximum material flow.
Engineering Service: In addition to the supply of the grid plates, we are often requested to strip and rebuild existing support frames. Before work commences, all the frames are checked for damage.
They are repaired or replaced as is necassary. The frames are then machined to equal depth and fitted with new grids.
Although, we have a special tool for the removal of stubburn fixing bolts, on rebuilding all the bolts used are coated with copper grease, to enable easier dismantling in future.
Most recently we have upgraded older pan mills to run with bearings in the wheel axles rather than bushes and have succesfully completed the rebuilding of a worn cast iron Handle Hm 2070a pan base.
Associated items: Fitting Bolts; Scrapers; Intermediate grids.
Support frames and Muller tyres available on request
Materials Specification: Our grids can be manufuctured in a range of materials from mild steel upto our most popular grid plate material has a through hardness of approx 445 Hv and provides the best cost / lifetime perforamce of any material currently available
Materials thickness available: Upto 35mm plate
Perforation Type: Please see attached pdf, which gives details of the various patterns we can manufacture. Slots and holes are available
Slots or Holes: Perforated as required, please specify your requiremnts.
All perforations are made with a 5 degree tapered opening to allow maximum material flow.
Engineering Service: In addition to the supply of the grid plates, we are often requested to strip and rebuild existing support frames. Before work commences, all the frames are checked for damage.
They are repaired or replaced as is necassary. The frames are then machined to equal depth and fitted with new grids.
Although, we have a special tool for the removal of stubburn fixing bolts, on rebuilding all the bolts used are coated with copper grease, to enable easier dismantling in future.
Most recently we have upgraded older pan mills to run with bearings in the wheel axles rather than bushes and have succesfully completed the rebuilding of a worn cast iron Handle Hm 2070a pan base.
Associated items: Fitting Bolts; Scrapers; Intermediate grids.
Support frames and Muller tyres available on request